Pre-Collision System with Pedestrian and Cyclist Detection

Road Sign Assist

Toyota Safety Sense's Road Sign Assist monitors the road signs ahead, displaying useful information such as the current speed limit or overtaking restrictions in clear view on the new colour TFT cockpit display. The system also provides a visual and acoustic warning if you are not following the road sign indication.

Automatic High Beam

Toyota Safety Sense's Automatic High Beam is designed to optimise visibility during night driving for all road users. A camera detects the lights of oncoming vehicles and leading traffic whilst also monitoring the brightness of streetlights. It switches automatically between high and low beam for safer night-time driving.

Full-range Adaptive Cruise Control

Toyota Safety Sense’s Full-Range Adaptive Cruise Control enables the car to maintain a constant speed without the use of the accelerator pedal, keeping a minimum, pre-set distance from the vehicle in front. If this distance falls, the system reduces speed to preserve the distance between the car and the vehicle ahead, applying the brakes and slowing to a stop if necessary. If the distance increases, the car will begin moving accelerating and/or slowing as required, until the traffic flow allows for a return to the pre-selected cruising speed. Please note that this function is only available on vehicles with an automatic transmission.

Intelligent Adaptive Cruise Control

When high-speed ACC or Full Range ACC is active and car is equipped with Road Sign Assist (RSA), the system recognises new speed limits along the driving route and suggests changes to cruising speed. The driver can easily reset the vehicle speed in accordance with the new speed limit, by using the ACC controls.

Adjustable Speed Limiter (ASL)

This function is a control system that suppresses acceleration above a vehicle speed (speed limit) pre-set by the driver. Acting as a guide, it controls engine output so that the vehicle speed does not exceed that of the pre-set speed limit while the driver is pushing on the accelerator pedal. The pre-set speed is shown on the combimeter display and will begin flashing when the vehicle reaches this speed.

Daytime running lights (LED)

Hill-start Assist Control (HAC)

HAC helps to ensure a smooth start on steep inclines by applying the brakes for up to 2 seconds after the brake pedal is released. This prevents the vehicle from rolling back. It is activated by pushing the brake pedal harder after stopping as long as the transmission shift lever is in any forward gear position.

Lane Trace Assist

Using a camera sensor and millimeter wave radar, the Lane Trace Assist system uses either the lane markings on the road ahead or the driving path of the vehicle in front to estimate its position on the road. If the car begins to drift from the centre of the lane unintentionally, steering assist is applied to correct its course. Please note that the system can only be used when Lane Departure Alert as well as Full-range Adaptive Cruise Control are turned on.

Tyre Pressure Warning System (TPWS)

The system features a sensor valve within each wheel to constantly monitor tyre air pressure. These sensors link with a dashboard indicator that illuminates to warn you if the pressure falls below the recommended level. By doing so, the system contributes to safer driving, better tyre wear and greater fuel efficiency.