Simple Intelligent Parking Assist with automatic braking

Simple Intelligent Parking Assist automatically manoeuvres you into your chosen parking spot, whether between two vehicles or behind one. Using ultrasonic sensors on the front side-bumper to identify a suitable parking space. You simply control the reversing speed with the support of automatic braking that helps prevent or reduce collisions at slow speeds, if the accelerator is misapplied or if the brakes are activated too late.

Pre-Collision System with Pedestrian Detection

Toyota Safety Sense’s Pre-Collision System* with Pedestrian Detection combines a millimetre-wave radar with a camera to detect other vehicles in the road ahead. When the possibility of collision is detected the driver is alerted with audio and visual warnings and brake assistance is activated. If the driver fails to brake in time the brakes automatically engage to prevent or mitigate a collision. In addition to vehicle detection, early detection of pedestrians is also made possible.
*Technical name: Pre-Crash Safety System

Road Sign Assist

Toyota Safety Sense's Road Sign Assist monitors the road signs ahead, displaying useful information such as the current speed limit or overtaking restrictions in clear view on the new colour TFT cockpit display. The system also provides a visual and acoustic warning if you are not following the road sign indication.

Adaptive Automatic High Beam

Blind Spot Monitor (BSM)

The Blind Spot Monitor system allows the driver to manoeuvre more safely during lane changes. If the rear-mounted radar sensors detect a vehicle in your side or rear blind spot, a warning indicator will illuminate on the appropriate side mirror. Should you indicate to change lanes and a vehicle is in your blind spot, the warning indicators will flsh to alert you that a lane change should be avoided.

Adaptive LED headlamps

Adjustable Speed Limiter (ASL)

This function is a control system that suppresses acceleration above a vehicle speed (speed limit) pre-set by the driver. Acting as a guide, it controls engine output so that the vehicle speed does not exceed that of the pre-set speed limit while the driver is pushing on the accelerator pedal. The pre-set speed is shown on the combimeter display and will begin flashing when the vehicle reaches this speed.

Vehicle Stability Control (VSC)

VSC automatically activates each individual brake as needed and controls engine output to help maintain stability and prevent skidding when turning sharply or cornering on slippery road surfaces.

Hill-start Assist Control (HAC)

HAC helps to ensure a smooth start on steep inclines by applying the brakes for up to 2 seconds after the brake pedal is released. This prevents the vehicle from rolling back. It is activated by pushing the brake pedal harder after stopping as long as the transmission shift lever is in any forward gear position.

Tyre Pressure Warning System (TPWS)

The system features a sensor valve within each wheel to constantly monitor tyre air pressure. These sensors link with a dashboard indicator that illuminates to warn you if the pressure falls below the recommended level. By doing so, the system contributes to safer driving, better tyre wear and greater fuel efficiency.

Rear Cross Traffic Alert (RCTA)

RCTA allows you to reverse out of a parking space safely by detecting other vehicles approaching your blind spot area. Using quasi-millimetre wave radar, RCTA alerts you with a buzzer and flashing indicators on the outer mirrors.